Scattered Scullery: Evolution of The Pitch

For everyone that prefers a low-profile DreadBall pitch, I’ve put together another card. Before we introduce the new card, let’s go over a bit of history.

The Original Pitch

When DreadBall was first released in 2012, it came with a board for a pitch.  This 1st Edition pitch was much simpler and much smaller with a lower profile (low-profile) on the table than the larger 2nd Edition pitches we’re familiar with today.

1e_dreadball_board
Original 1st Edition Pitch

 

Action Tracker and Pitch Evolution

As more and more Coaches took to the game, they began to see opportunities to improve upon the basic 1st edition folding board pitch. The idea of printing the pitch on a neoprene mat was attractive. Without the original artwork for the pitch, we had to recreate the entire pitch design before we could print it. The first new designs were merely recreations of the original, but on neoprene.

Hyperdyne_Arena_28x14
Hyperdyne Arena

Those neoprene pitches were nice, but the hexes were the same size as the original. Often players on the pitch, when next to each other, did not have enough room. The next pitch designs increased the hex size from the original 25mm to a spacious 30mm.

The larger hexes were great and opened the door to the concept of improving the DreadBall pitch. In late 2013 and early 2014, features that would require a larger area were added; spaces for the card deck, discard pile, and Action Token storage. One of the first larger pitches incorporating these features was the Neo-Tek Tesla Dome.

Neo-Tek_v8_24x28_v6
Neo-Tek Tesla Dome by SHAWN GRUBAUGH

The improvments continued:

  • Coaching Dice area
  • Ball launch direction indicators
  • Strike values
  • Standarized scatter direction
  • Action Token tracker
  • Assistant Coach areas

687474703a2f2f332e62702e626c6f6773706f742e636f6d2f2d66657268766367794453412f564d6642707a3865504e492f4141414141414141434e6f2f4e644443464e646e3941592f73313630302f32387832345f41315f44

Mantic, acknowledging the fan improvements, released their own large size neoprene pitch that included the new pitch additions. It was named the Gruba-Tek VII Coliseum as a nod to Shawn Grubaugh who, as mentioned, created one of the first large size pitches.

Gruba-Tek-VII-Coliseum
Gruba-Tek VII Coliseum

1st Edition Cards and Player Numbers

The Action Token tracker was added as a nice way to keep track of how many Action Tokens a Coach was spending on players. The Action Token tracker was numbered 1 to 14, with an area to indicate if a Coach had used a token to purchase a card as well.

The tracker could be numbered from 1-14 because in 1st Edition DreadBall, all players HAD to be numbered between 1 and 14. This numbering requirement was based on the way the cards worked in 1st Edition. The cards in 1st Edition DreadBall often affected a random player. To determine which random player, a Coach would draw a card and read the numbers down the right hand side of the cards. The first number (1 to 14) that matched a player on the pitch indicated that player had been randomly selected.

1e_card.png
1st Edition Action Card with player randomizer down the right hand side

2nd Edition and Player Numbers

When Mantic decided to release a 2nd edition of DreadBall, they looked at what fans had been doing with the pitch design and decided to incorporate almost all of the additional features into the official 2nd Edition pitch. This meant the new official pitch was of the large variety, on a quad-fold board.

DB-Pitch-iso
Official 2nd Edition DreadBall Pitch Design

The random selection of players was removed in 2nd Edition. There was no longer a requirement for players to be numbered only between 1 and 14. Despite no longer being limited in the numbering of players, the Action Token tracker remained on the new official pitch, still using 1-14.

This Coach’s Opinion

I have played on all of these different pitch designs across many different versions of the game. Overall, the fan additions that Mantic adopted into the official design are fantastic.

In my opinion, the Action Token track should have been removed from the 2nd Edition pitch. It’s a nice feature, but it’s not needed. Keeping track of your Action Tokens can be done in a few other ways. With no requirement to number players using only 1-14 for player randomization, leaving the Action Token tracker on the pitch in 2nd Edition has always bothered me. That mentioned, it is an easy way to track your player Actions and can certainly help coaches that are just learning DreadBall.

I’ve stated many times that I prefer the smaller, low-profile pitches, closer in size to the original 1st Edition pitch. There is no room on a low-profile pitch for a dedicated Action Token tracker area. Since I know many coaches like the Action Token tracker but may also have seen the benefits of a low-profile pitch, I’ve created an Action Token track card that can be placed beside a low-profile pitch.

New Action Tracker Card

Here is the new card(s). They are designed to fit on big cards (3.5″ x 5.75″). There is a version with and without a designateds area to tuck your Fan Checks under as well as 2 different numbering patterns, Left to Right and Top to Bottom.

The Features of a State-of-the-Art Low-Profile Pitch

Wrapping up, let’s take a look at all the feature on a modern low-profile pitch. It’s a long way from that original pitch from back in 2012.

pitch_features

EDIT: See all our pitches HERE including my newest design made for the Ontario DreadBall Leage (ODBL).

Dreadball_2018_Pitch_28x14_ODBL_v3_30
Ontario DreadBall League Pitch

4 thoughts on “Scattered Scullery: Evolution of The Pitch

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s